Air Tools

 
 
 
18 results - showing 1 - 10 1 2
Ordering 
Editor rating
 
0.0
User rating
 
0.0 (0)
 
Cadex  1-3/8
Manufacturer Cadex
Nail size 23 gauge
 
Editor rating
 
0.0
User rating
 
0.0 (0)
 
Cadex 2
Manufacturer Cadex
Nail size 23 gauge
 
Editor rating
 
0.0
User rating
 
3.2 (1)
 
DEWALT D55250 4 Horsepower 4 Gallon Oiled twin stack compressor
Manufacturer DeWalt
4 HP, 4 Gallon, Gas Twin Stack Compressor, High Volume Air Output 4.5 CFM @ 100 PSI, Portable Air Power Honda 4 HP Gas, Automatic Throttle Idle Control, Direct Drive...
 
Editor rating
 
0.0
User rating
 
4.8 (1)
 
Grex  23 Gauge 1-3/8
Manufacturer Grex
Nail size 23 gauge
 
Editor rating
 
0.0
User rating
 
4.4 (1)
 
Hitachi N 3804AB3 narrow crown stapler
Manufacturer Hitachi
1/2- to 1-1/2-inch 18-gauge narrow crown stapler with factory installed air fitting for convenience Selective actuation switch to choose between bump fire or sequential fire modes; tool free depth adjustment Tool-less, easy...
 
Editor rating
 
0.0
User rating
 
4.8 (1)
 
Hitachi NR83A2 Framing Nailer
Manufacturer Hitachi
Nail size Framing
NR83A2, 3-1/4", Framing Nailer, Features: Lightweight & Well Balanced, Only 7.9 LBS, Tool Less Depth Adjustment, 2 Piece, Black, Stainless Steel Magazine For Replacement Ease, Open Nose Design Allows For...
 
Editor rating
 
0.0
User rating
 
4.8 (1)
 
Hitachi NT65MA2 15 Gauge Angled Finish Nailer
Manufacturer Hitachi
Nail size 15 gauge
1-1/4- to 2-1/2-inch 15-gauge angled finish nailer with integrated air duster for clearing away dust and debris Simple depth of drive adjustment; easy clear nose; adjustable air deflector Lightweight aluminum body; durable...
 
Editor rating
 
0.0
User rating
 
3.8 (1)
 
Hitachi NV65AH 2-1/2-Inch Coil Siding Nailer
Manufacturer Hitachi
Nail size Siding
2-1/2-inch coil siding nailer operates at 70-120 psi; accepts plastic and wire collated nails Tool free depth of drive adjustment; air deflector pivots 360 degrees; no-mar nose cap Anodized aluminum and comfortable rubber...
 
Editor rating
 
0.0
User rating
 
0.0 (0)
 
Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer
Manufacturer Hitachi
Nail size Siding
5.5lbs, lightweight and well balanced for easy maneuverability. Side load magazine, easy to quickly replenish nails. Tool-less depth of drive adjustment, for precision nailing/flush driving. Drives both wire collated and plastic sheet collated...
 
Editor rating
 
0.0
User rating
 
4.8 (1)
 
Makita 12.4 Amp 2 Horsepower 2.6 Gallon compressor - MAC700
Manufacturer Makita
2-horsepower, 2.6 gallon oiled compressor
 
 
18 results - showing 1 - 10 1 2 Results per page:
Copyright © 2007-2008 Tool-Rank. All rights reserved.
Use of this site constitutes acceptance of our Terms & Conditions and Privacy Policy.